Oki B8300 Bedienungsanleitung PDF herunterladen (Seite 83)

Saddle stitch finisher — 82

Staple cartridge replacement and

staple jam removal

When the staple cartridge becomes empty or

staples become jammed, a message will appear

in the message display of the operation panel.

Follow the procedure below to replace the

staple cartridge or remove jammed staples.

1. Open the front cover.

2. Pull out the stapler section.

3. Turn roller rotating knob A in the direction

of the arrow to move the staple unit to the

front. Turn the roller rotating knob until the

triangle mark is aligned with the index.

4. Remove the empty staple box.

5. Remove the empty staple cartridge.

Press the lock button to unlock the staple box

cover and remove the staple cartridge.

If staples remain, the staple cartridge cannot

be removed

6. Insert a new staple cartridge into the

staple box.

After inserting the staple cartridge, press down

on the staple box cover to lock the cartridge in

place. When reinstalling the staple box, push it

in until it clicks into place. Do not remove the

tape from the cartridge before inserting the

staple cartridge into the box.

7. Remove the tape from the staple cartridge

by pulling it straight.

8. Insert the staple box. When reinstalling

the staple box, push it in until it clicks

into place.

9. Push the stapler section back into the

finisher. Close the front cover.

Make a test print in staple sort mode to ensure

that stapling is performed properly

Roller rotating knob A

Staple unit

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 94 95

Kommentare zu diesen Handbüchern

Keine Kommentare