Oki B8300 Bedienungsanleitung PDF herunterladen (Seite 32)

Overview — 31

Developer cartridge replacement

When the cartridge needs replacing, a message

indicating the need to replace it will appear in

the display. Follow the procedure below to

replace the developer cartridge. The machine

as shipped from the factory does not have a

cartridge installed.

Follow the procedure below to install the first

cartridge omitting steps 3 and 4.

1. Turn off the power and open the front

cover.

2. Lower the cartridge lock lever.

3. Remove the developer cartridge. Push the

lock release button and pull out the

developer cartridge until it stops.

Push the lock button at the rear and

remove the developer cartridge.

5. Remove the new developer cartridge from

its bag and remove the tape and

protective material A and B.

6. Shake the new developer cartridge

horizontally five or six times.

7. Insert the new developer cartridge.

8. Push the cartridge in until it locks

securely into place.

9. Close the front cover. The machine will

become available in about two minutes.

● Do not shake the developer cartridge after the

sealing tape has been removed. If the cartridge

is shaken after the tape is removed, some

developer will come out of the cartridge.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 94 95

Keine Kommentare

Oki B8300 Bedienungsanleitung Seite 32