Oki B8300 Bedienungsanleitung PDF herunterladen (Seite 53)

Key operator programs — 52

Key operator programs

This section describes the key operator

programs which can be set using the operator

panel.

Account control

● The program Auditing mode is used to set the

internal auditor function. The other programs

of this category can be set only if the auditing

mode has been enabled.

Auditing mode

When the auditing mode is enabled, up to 100

five-digit account numbers can be registered

and assigned to users. An assigned account

number must be entered for access to printing.

Print per account

This program is used to display or print the

total number of prints against each account

number. Misfed pages are not counted.

Reset account

This program is used to reset all or individual

audit accounts.

Account number control

● Account numbers must be five digits long and

can be registered successively.

● Account numbers can be deleted, changed

individually or all at once.

● To change an account number, enter the

number to be changed and then enter a new

number. This process can be repeated.

Changes for unregistered account numbers

will not be registered.

No print if ACC’T # invalid

If this program is set in the auditing mode, and

an invalid account number is entered or no

account number is entered on the computer,

printing will be disallowed. If this program is

not set, printing will be allowed and the

number of prints will be accumulated as

“OTHERS” in the print total.

Energy save

Two programs are provided to help cut

electricity costs, eliminate waste and reduce

environmental pollution. In situations where it

is impractical to use the Auto power shut-off

timer, a program is provided to cancel that

function. There is also a program for reducing

toner consumption.

Auto power shut-off timer

When a programmed length of time has

elapsed without any operation after printing is

complete, the printer will enter the auto power

shut-off mode to save the maximum amount of

energy. The time until auto shut-off occurs can

be set to 15, 30, 60, 120 or 240 minutes.

If you use the program Auto power shut-off to

disable the auto power shutoff mode, the time

set with this program will be ignored.

Auto power shut-off

When a programmed length of time has

elapsed without any new operation taking

place, the printer enters the auto power shut-

off mode to save the maximum amount of

energy. If it becomes impractical to use this

feature, this program can be used to disable it.

If disabled, the auto power shut-off time setting

will be ignored. We recommend you enable this

function to save the environment and costs

Preheat mode

The printer will enter the preheat mode after a

programmed length of time has elapsed

without any new operation after printing is

complete. Set the most appropriate time

according to your usage pattern. The time until

the printer enters the preheat mode. This

function can also be disabled.

Toner save

Printing in toner save mode will reduce toner

consumption. If toner save is set, black solid

areas will be printed as halftone. (This setting

is effective only for printing without use of a

printer driver. If the printer driver is used, the

printer driver setting will override the setting of

this program.)

Print data

Example of

print in the

toner save

mode

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 94 95

Kommentare zu diesen Handbüchern

Keine Kommentare