Oki MC363dn Bedienungsanleitung PDF herunterladen (Seite 104)

Advanced network settings > 104

Using EAP-TLS

1. Access the machine’s web page and log in as the administrator.

2. Select Admin Setup.

3. Select Network > IEEE802.1X.

4. Select Enable for IEEE802.1X.

5. Select EAP-TLS for EAP Type.

6. Enter a user name in EAP User.

7. Select Not use SSL/TLS Certificate for EAP authentication and then click

Import.

8. Enter the file name of the certificate.

Only a PKCS#12 file can be imported.

9. Enter the password of the certificate and then click OK.

10. Select Authenticate Server and then click Import.

11. Enter the file name of the CA certificate and then click OK.

Specify the certificate issued by the certificate authority from which the RADIUS

server got it. A PEM, DER, and PKCS#7 file can be imported.

12. Click Submit.

The network system reboots to enable the new settings.

13. When the standby screen appears on the machine, turn off the machine.

14. Go to “Connecting your machine to authentication switch” on page 104.

ONNECTING

YOUR

MACHINE

AUTHENTICATION

SWITCH

1. Make sure that the machine is turned off.

2. Connect an Ethernet cable to the network interface port.

3. Connect the Ethernet cable to the authentication port of an authentication switch.

4. Turn on the machine.

5. Set up the machine.

NOTE

For details on the initial setup, refer to “Configuring the network settings” on

page 9.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 110 111 112

Keine Kommentare

Oki MC363dn Bedienungsanleitung Seite 104