Oki RS-422 Bedienungsanleitung PDF herunterladen (Seite 9)

RS-232C/RS-422 Serial Interface Option 1-3

4. Slide the cover towards the rear of the printer and then downwards to remove it.

5. Turning thumbscrews counter-clockwise, remove the blank metal plate covering one of the avail-

able network ports on the controller bracket.

NOTE: It is not necessary to remove the controller from your printer to install the serial interface. For

clarity, the following illustrations depict a controller removed from the printer. When facing the

front of the controller as shown below, network port 1 is on the right and network port 2 is on the

left. However, when installed in the printer, network port 1 is on the bottom and network port 2 is on

top. In the following few steps, a serial network interface is being installed in network port 2.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Keine Kommentare

Oki RS-422 Bedienungsanleitung Seite 9