Oki C532dn Bedienungsanleitung PDF herunterladen (Seite 64)

- 64 -

3. Basic Operations

Insert the paper with the print side up until its edge touches the paper feed

entrance.

Do not load paper above the " " mark.

When a printer is in the power saving mode, press the (Power Save) button to restore from the mode.

Press the or button on the operator panel to select [Setting] and press

the (ENTER) button.

Select [Paper Setup], and then press the (ENTER) button.

Select the MP tray, and then press the (ENTER) button.

Set [Paper Size].

Set [Media Type].

Set [Media Weight].

Press the (ONLINE) button to return to the standby screen.

• Do not load paper in different sizes, types, or weights.

• When adding sheets of paper, remove paper loaded in the MP tray, bundle the whole batch of sheets, and align

edges of sheets to load them.

• Do not insert objects other than paper in the MP tray.

Store paper under the following conditions to maintain quality.

• Inside a cabinet or other dry and dark place

• On a flat surface

• Temperature: 20°C

• Humidity: 50% RH (relative humidity)

Do not store paper in the places as shown below:

• Directly on the floor

• Where paper is exposed to direct sunlight

• Near the inside of an exterior wall

• On an uneven surface

• Where static electricity may be generated

• Where temperature excessively rises high and temperature rapidly changes

• Near this machine, an air conditioner, a heater, or duct

• Do not unwrap paper until just before you use.

• Do not leave paper unwrapped for a long period. Doing so may result in printing problems.

• Depending on the print media, environment, storage conditions the print quality may deteriorate or printout may get

curled.

Paper storage

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 130 131

Keine Kommentare

Oki C532dn Bedienungsanleitung Seite 64