Oki 70043502 Bedienungsanleitung

Hard Disk Drive (HDD)Installation Instructions c53_105_hdd.jpg for HDD Part Number 70043502 59387901

1013. Replace the side panel on the printer. Use the thumbscrew to secure the panel. C6100_4.jpg 14. Close the front cover. C6100_15.jpg

1115. Close the top cover. C6100_16.jpg 16. Attach the interface cable.17. Plug in the power cord.18. Turn on the printer.

12Verify the InstallationPrint the MenuMapNote: The MenuMap is a list of the current menu settings. Keypad.jpg 1. Press + one or more times until

13Change the Driver SettingWindows®Postscript Emulation Driver 1. Click Start → Settings → Printers [Printers and Faxes for XP].2. Right click the ap

14PCL Driver 1. Click Start → Settings → Printers [Printers and Faxes for XP].2. Right click the PCL printer icon. Click Properties.3. Click the Dev

15Mac OS X to X.1No activation is required.Mac OS X.21. Activate Print Center from Local Hard Drive → Applications → Utilities → Print Center.2. Hig

Oki Data Americas, Inc.2000 Bishops Gate Blvd.Mt. Laurel, NJ 08054-4620Phone: (800) 654-3282FAX: (856) 222-5320www.okiprintingsolutions.com 59387901

2Copyright Information© 2006 by Oki Data Americas, Inc. All rights reserved.Document InformationHard Disk Drive (HDD) Installation InstructionsP/N 593

3Installation1. Turn off the printer (1).2. Unplug the power cord (2).3. Detach the interface cable from the back of the printer (3). C6100_1.jpg

44. Open the top cover. C6100_2.jpg 5. Open the front cover. C6100_3.jpg

56. Loosen the thumbscrew holding the printer side cover in place. C6100_4.jpg

67. Lift up on the ends. Remove the side panel from the printer. C6100_5.jpg

78. Locate the slot (1) on the control board shield. C6100_10.jpg

89. Remove the HDD from its shipping package.10. Insert the top of the HDD cage into the slot on the control board shield. C6100_11.jpg

911. Tighten the thumbscrews (1) to secure the HDD. C6100_12.jpg 12. Insert the HDD cable firmly into the connector. C6100_13.jpg